SKF-18D is for beveling the top-side of plate
SKF-18U is for beveling the under-side of plate
Operates at 10 feet (3 meters) per minute
WITH ADJUSTABLE BEVELLING HEAD TO PRODUCE BEVEL ANGLES 22 1/2° THROUGH 55°
AOTAI's SKF-18 & SKF-18U Portable, Self-Propelled
Plate Edge Bevellers produce clean machined bevels with no thermal distortion on mild steel, stainless steel and aluminum plate from 1/4" (6.0 mm) to 1 1/2" (38.1 mm) thick. Thinner material can be beveled^ consult factory for details. The SKF-18U ® Bevels the underside of plate eliminating the need to flip the work piece...Reducing time and cost. Savings are further enhanced when both units are used in applications where both sides of the material require beveling.
Adjustable Undercarriage...For
Easy Height Adjustment
The SKF-18® Can be purchased with a adjustable height, self-aligning, spring-loaded caster wheel assembly for self-propelled beveling along any length of plate maintaining a uniform bevel and consistent root face. Undercarriage sold separate
Angle Bevel Pins...Enable
Bevel Angle Adjustment
...SKF-18® Units are supplied with angle bevel pins for 22 1/2° , 30° , 37 1/2° , 45 ° And 55° Bevels. Pins for other bevel angles are available upon request.
Data Sheet:
Maximum Bevel Width: 0.71" (18.00 mm) at standard 30° Bevel angle on material with a tensile strength of 450Mpa
Maximum Bevel Depth: 0.61" (15.6 mm) at standard 30° Bevel angle on material with a tensile strength of 450Mpa
Min. Plate Thickness: 1/4'' (6.0mm) Thinner material can be beveled...Consult factory for details
Max. Plate Thickness: 1 1/2" (38.1 mm)
Bevel Speed: 120 in. (304.8 cm) per minute (adjustable speed can vary depending on your requirement)
Servo Motor: 2 phase, 220V~ at 50Hz, 2.3KW; Max torque 45N. M. °
Weight: 220Kg.
SKF-18 ® Comes complete with the following
Standard equipment:
1- SKF-18-X1: Deep Tooth Cutter (medium cut)
1- Set Bevel Angle Pins for 22.5° , 30° , 37.5° , 45° And 55°
1- Tool Kit
1-SKF-18 Adjustable Height Undercarriage
Accessories available:
- SKF-18-X1C: Medium Tooth Cutter (smooth finish)
- SKF18-X1: Deep Tooth Cutter (medium cut)
- SKF-18-FXS: Shallow Tooth Cutter (fine cut)
- SKF-18(Specify Degree Required): Angle Bevel Pins for angles other than those supplied as standard
- SKF-18-0.5: Cutter Shims
- SKF-18-1.0: Cutter Shims
Note: Cutter Shims is for complementing the Width detritions of knife drum after beveling
| Bevel Angle |
TENSILE STRENGTH |
| 64.000 lbs /in² (45 kg/mm² ) |
71, 000 lbs /in² (50 kg/mm² ) |
85.000 lbs /in² (60 kg/mm² ) |
| A |
W |
D |
W |
D |
W |
D |
| 22.5º |
0.71" [18.0 mm] |
0.65" [16.6 mm] |
0.63" [16.0 mm] |
0.58" [14.8 mm] |
0.55" [14.0 mm] |
0.51" [13 mm] |
| 30º |
0.71" [18.0 mm] |
0.61" [15.6 mm] |
0.63" [16.0 mm] |
0.55" [13.9 mm] |
0.55" [14.0 mm] |
0.48" [12.1 mm] |
| 37.5º |
0.67" [17.0 mm] |
0.53" [13.5 mm] |
0.59" [15.0 mm] |
0.47" [11.9mm] |
0.51" [13 mm] |
0.41" [10.3 mm] |
| 45º |
0.63" [16.0 mm] |
0.45" [11.3 mm] |
0.55" [14.0 mm] |
0.39" [9.9 mm] |
0.47" [12 mm] |
0.33" [8.4 mm] |
| 55º |
0.59" [15.0 mm] |
0.34" [8.6 mm] |
0.51" [13.0 mm] |
0.29" [7.5 mm] |
0.43" [11 mm] |
0.25" [6.3 mm] |
Audited Supplier 
){kind=link}